Explaining what a test jig is and why we need it

Matt talks about the manufacturing process and how having a test jig can allow us to test all the functionalities of the circuit board early on in the process. The test jig is important so we can spot errors in the PCB before sending it to the final assembly line....

SUBSCRIBE TO OUR NEWSLETTER

Stay up to date with our Dygma Raise product. Drop your email below.

The start of the Golden Prototype

The start of the Golden Prototype

What’s a Golden Prototype? The Golden Prototype is the prototype that should look and work as the final product. It should have the same finishing, the same functionalities, and it should have the same dimensions. This is the prototype you use to validate a product,...

read more
Trip to Shenzhen – Part III

Trip to Shenzhen – Part III

Last month, Manel our Product Manager went on his third trip to the Pearl River Delta. Shenzhen, China. His first trip was in July 2017, where he went with Matt and Luis to do the preliminary visits to the factories. The second trip was in January of this...

read more
The final decision with the Huble & Backerkit survey updates

The final decision with the Huble & Backerkit survey updates

With all the information that we’ve received from our backers, and with all the information we have gathered from our research and development, we’ve decided to remove the hub from the Huble. Watch the video below to get the full details. In our previous update, we...

read more
The evolution of the joint

The evolution of the joint

What’s interesting and unique about the Raise keyboard is that it’s a split keyboard that can be attached and detached. And finding the best solution to achieve a good design for this feature can be challenging. We knew that we wanted a great solution for this...

read more
Our challenge with the Huble…

Our challenge with the Huble…

... and how we're solving it We had encountered an interesting challenge with the Huble that needed some feedback. https://youtu.be/uwXCnhHbnFU   The Raise draws 500 milliamps of current. This is the amount that it needs to work. Our USB specs give us a maximum of 500...

read more
Mid-May updates on the Raise keyboard

Mid-May updates on the Raise keyboard

Hey there guys, We know it’s been a while since our last update. A lot has been going on but we do hope that you bear with us as we move forward. We are trying to give the updates as soon as possible! And our first update comes from China. Samples from Shenzhen, China...

read more
Mid April update about Dygma Raise project

Mid April update about Dygma Raise project

Hi there guys, Here’s a short recap of what’s been going on in Dygma in the past few days. The Huble. We have been working and testing the prototypes of the Huble. The industrial design is finalized, now we are working on the DFM (design for manufacturability) with...

read more
March development update

March development update

Hey guys! We are trying as much as possible to compile all the updates we have during the week. This will allow us to give you a more thorough and complete update. So we apologise if this update has taken a bit longer than expected. Here are our updates: Trip to...

read more
Ergonomics: Be Part Of The Cycle

Ergonomics: Be Part Of The Cycle

Our days are ruled by a set of activities that we repeat over and over. It’s a cycle. It’s our daily routine. Some of us find ourselves doing these daily tasks in autopilot mode. We wake up. We take a bath. We have breakfast. We have coffee. We go to work. We...

read more
Trip to Shenzhen Part II – The Pearl River Delta

Trip to Shenzhen Part II – The Pearl River Delta

Last July 2017, Luis, Matt, and I visited Shenzhen city, one of the major technological cities in the Pearl River Delta. Trip to Shenzhen,  July 2017 For the last month’s we’ve been looking for factories to manufacture in Europe. We’ve reached the conclusion that it...

read more
Dygma Raise Weekly Development Updates

Dygma Raise Weekly Development Updates

Hi again! As you all well know we always love giving you guys updates on the Raise keyboard. We’ll be posting weekly development updates just so everyone is informed with what is happening, not only with the keyboard, but also with our team! Dygma continues to grow...

read more
Dygma welcomes the newest member of the team

Dygma welcomes the newest member of the team

Dygma welcomes the newest member of the team, Dominique! She will be handling the majority of the communication side of the company. She will manage blog posts and social media posts, as well as create some cool content for Dygma. We welcome her with open arms and...

read more

Get your Dygma Raise Now!

Pre-order now with a 10% discount and FREE shipping worldwide.